79
5. Using On-Screen Menu
Hints on How to Set Up LAN Connection
To connect a DHCP server:
From the projector menu, select [SETUP]
→
[WIRED LAN]
→
[SETTINGS]
→
[DHCP]
→
[ON] and press the ENTER
button. To specify IP address without using the DHCP server, use the HTTP server. (
→
page
To set only for wireless LAN (NETWORK TYPE and WPA2 PSK):
Access the HTTP server to display the web browser (
→
) and select [NETWORK SETTINGS]
→
[SETTINGS]
→
[WIRELESS LAN]
→
[INFRASTRUCTURE] and then click [APPLY].
Make necessary settings for [SETTINGS], click [SAVE] for storing set values and then click [APPLY] to reflect
these values to wireless LAN connection.
To select an SSID:
Access the HTTP server to display the web browser (
→
page
) and select [NETWORK SETTINGS]
→
[SET
-
TINGS]
→
[WIRELESS LAN]
→
[INFRASTRUCTURE] and then click [APPLY]. After completion of these steps,
click [SETTING] for the INFRASTRUCTURE and then click [SITE SURVEY] on the [CONNECTION] page, finally
select the SSID you want to connect on the list.
If you do not use [SITE SURVEY], type the SSID in [CONNECTION]. (
→
)
To receive lamp replacement time or error messages via e-mail:
Access the HTTP server to display the web browser (
→
) and select [NETWORK SETTINGS]
→
[ALERT
MAIL], and set [SENDER’S ADDRESS], [SMTP SERVER NAME], and [RECIPIENT’S ADDRESS]. Last, click [SAVE].
(
→
)
