background image

Safety Precautions and Maintenance

FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE

FOLLOWING WHEN SETTING UP AND USING

THE MULTISYNC

®

 P

1150

 COLOR MONITOR:

• DO NOT OPEN THE MONITOR. 

There are no user serviceable parts inside and opening or

removing covers may expose you to dangerous shock hazards or other risks. Refer all
servicing to qualified service personnel.

Allow adequate ventilation around the monitor so that heat can properly dissipate. Do not
block ventilated openings or place the monitor near a radiator or other heat sources. Do not
put anything on top of monitor.

Do not spill any liquids into the cabinet or use your monitor near water.

Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage
points, which can be harmful or fatal or may cause electric shock, fire or equipment failure.

Do not place any heavy objects on the power cord. Damage to the cord may cause
shock or fire.

Do not place this product on a sloping or unstable cart, stand or table, as the monitor may
fall, causing serious damage to the monitor.

Keep the monitor away from high capacity transformers, electric motors and other devices
such as external speakers or fans, which may create strong magnetic fields.

If possible, position the monitor so that it is facing the east to minimize the effects of the
earth’s magnetic field.

Changing the direction of the monitor while it is powered on may cause image
discoloration. To correct this, turn the monitor off for 20 minutes before powering
it back on.

The power cable connector is the primary means of detaching the system from the power
supply. The monitor should be installed close to a power outlet which is easily accessible.

Handle with care when transporting. Save packaging for transporting.

Immediately unplug your monitor from the wall outlet and refer servicing to qualified
service personnel under the following conditions:

When the power supply cord or plug is damaged.

If liquid has been spilled, or objects have fallen into the monitor.

If the monitor has been exposed to rain or water.

If the monitor has been dropped or the cabinet damaged.

If the monitor does not operate normally by following operating instructions.

Recommended

Use

6

78131622

7/29/98, 8:59 AM

8

Summary of Contents for P1150 - MultiSync - 21" CRT Display













Reviews: