Size and Position Controls
Left/Right:
Moves the image horizontally (left or right).
Down/Up:
Moves the image vertically (up or down).
Narrow/Wide:
Increases or decreases the horizontal size
of the image.
Short/Tall:
Increases or decreases the vertical size of the image.
Color Control/AccuColor
®
Control System
Color presets 1 through 5 selects the desired color setting. The bar
is replaced by the color setting choice from 1 to 5. Each color
setting is adjusted at the factory to the stated degree Kelvin. If a
setting is adjusted, the name of the setting will change from degree
Kelvin to Custom.
Red, Green, Blue:
NEC's AccuColor Control System increases or
decreases the monitor's red, green or blue color guns depending
upon which is selected. The change in color will appear on screen
and the direction (increase or decrease) will be shown by the bars.
Geometry Controls
Geometry Controls Menu
The
Geometry
controls allow you to adjust the curvature or angle of
the sides of your display.
Sides In/Out (pincushion):
Increases or decreases the curvature of the
sides either inward or outward.
Sides Left/Right (pincushion balance):
Increases or decreases the
curvature of the sides either to the left or right.
Sides Tilt (parallelogram):
Increases or decreases the tilt of the sides
either to the left or right.
Sides Align (trapezoidal):
Increases or decreases the bottom of the
screen to be the same as the top.
Rotate (raster rotation):
Rotates the entire display clockwise or
counterclockwise.
Controls
3
78131622
7/29/98, 8:59 AM
5
