manualshive.com logo in svg

NEC P/N 1093099, Feature Handbook, Page: 106 / 190

Share
Download
NEC P/N 1093099 Feature Handbook Download Page 106

Line Group Routing

98

◆

Features

DSX Feature Handbook

Line Group Routing

Description

With Line Group Routing enabled, an extension user can just press 

INTERCOM

 and dial 

9

 to place an out-

side call. Line Group Routing automatically selects the 

fi

rst available line in the extension’s programmed 

“dial 9” Line Group. This simpli

fi

es placing calls in systems that have a lot of lines for outgoing calls. 

Rather than press one of many line keys, the user just dials 

9

 instead.

Operation

Dial a single code to place a call over the 

fi

rst available line in a Line Group.

Using Line Group Routing

In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]

•

By default, pressing Intercom and dialing 911 or lifting the handset and dialing 911 will not call emergency services.

To place a call using Line Group Routing:

1.

Lift the handset and press 

INTERCOM

.

2.

Dial 

9

.

• If you don’t hear dial tone, Line Group Routing is not enabled.
• If you hear busy tone and your extension has Line Queuing, you can dial 

2

 to queue for a line to become free. 

If you hang up, the system converts the queue to a Line Callback.

3.

Dial your outside number.

Summary of Contents for P/N 1093099































































































































































































Reviews:

No comments