NEC NP901W Page 79 User Manual Download

Page: 79 / 166

Projecting a movie file

Preparation: Store MPG files in a USB memory inserted into your PC.

To display a movie file:

1. Press the SOURCE button to select [VIEWER].

Viewer screen will be displayed. (a slide will be displayed at the factory default.)

2. Select a movie file icon from [THUMBNAILS] screen and press the ENTER button.

[THUMBNAILS]

Movie icon

TIP:

To return from the movie screen to [THUMBNAILS], press the EXIT button.

NOTE:

• If you select an unsupported file, a message "This file cannot play back." will be displayed and the VIEWER will return to the

thumbnail screen.

• If you change a source during playback of a movie file, the playback will stop.

• If you press any other button than the ENTER button during playback of a movie file, the playback will stop and the VIEWER

may return to the thumbnail screen.

• If you start playing back a movie file with the projector connected to the network, the network will be disconnected.

• If you use a USB memory device which has a slow reading speed, the movie file may not play back correctly.

• If you remove or insert the USB memory device during playback of a movie file, an error may occur with the VIEWER.

Remote control button operation when a movie is played back:

ENTER ................... Press this button during playback to pause playback. Press this button when the movie is paused to re-

sume playback.

Press this button during fast-forward or rewind to return to playback.

Press this button when the movie is stopped to start playback.

EXIT ....................... Press this button to return to the thumbnail screen.

The Control Bar

Pressing the MENU button during playback will display the control bar which allows you to operate movie files.
Press the EXIT button to close the control bar.
The control bar contains the following icon buttons:

5. Using the Viewer

rewind the movie. When rewind-

ing is complete, the movie auto-

matically begins playback.

starts playback or
pauses playback of
the movie.

fast-forward the movie. When fast-

forwarding is complete, playback stops.

Quits playback and then
returns to the thumbnail
screen.

stops playback of the movie.

Summary of Contents for NP901W







































































































































































Search results

Summary of Contents for NP901W

Reviews:

Related manuals for NP901W

Brands by name

Popular brands

NEC NP901W, User Manual

Search results

Summary of Contents for NP901W

Reviews:

Related manuals for NP901W

Brands by name

Popular brands