manualshive.com logo in svg

NEC NP-PX700W2, User Manual, Page: 67 / 252

Share
Download
NEC NP-PX700W2 User Manual Download Page 67

53

3. Convenient Features

②

 Adjust [RANGE] and [POSITION] to determine an area of overlapped edges of images 

projected from each projector.

[RANGE]
(Determine an area of overlapped edges of 
images.)

[POSITION]
(Determine the position of overlapped edges of images.)
Green marker

Turn on [RIGHT]

Magenta marker

Turn on [LEFT]

Magenta marker

Turning on [MARKER] will display markers in magenta and green.
The magenta marker is used for [RANGE] and green one for [POSITION].

1  Adjust [RANGE].
  Use the 

◀

 or 

▶

 button to adjust the overlapped area.

TIP:

•  Adjust to overlap one projector’ marker with the other projector’s marker.

2  Adjust [POSITION].
  Use the 

◀

 or 

▶

 button to align one edge with the other edge of overlapped images.

Summary of Contents for NP-PX700W2





























































































































































































































































Reviews:

No comments