![background image](http://html.mh-extra.com/html/nec/np-px1005ql-b/np-px1005ql-b_user-manual_250517153.webp)
138
6. Installation and Connections
Design and manufacturing conditions for the stand
Please hire an installation service provider (for a fee) for the design and manufacture of a customized stand to be
used for portrait projection. Please ensure that the design complies with the following conditions:
• There are 3 ventilation holes at the bottom of the projector. These holes should remain unobstructed.
• Use the 6 screw holes at the back of the projector to secure it to the stand.
Screw hole center dimension: 300 × 300 (pitch = 150) mm
Screw hole dimension on the projector: M4 with the maximum depth 16 mm
4 of the legs can be unscrewed for removal.
• Horizontal adjustment mechanism (for example, bolts and nuts in 4 places)
• Please design the stand so that it does not easily topple over.
Reference drawings
* The drawing showing the dimensional requirements is not an actual stand design drawing.
300
150
150
124.5
[Side View]
[Front View]
(Unit: mm)
Horizontal adjuster
Air exhaust
6 - M4 bolt
Air intake
Air intake
Air intake