NEC NP-P350W User Manual Download Page 159

Page: 159 / 222

141

6. Installation and Connections

Prepare a Phillips screw driver beforehand.

1. Press the POWER button to turn off the projector and set it

into standby condition, and disconnect the power cord.

2. Remove the USB (LAN) port cover.

Loosen the screw securing the port cover.

• The screw is not removable.

3. Slowly pull out the USB Wireless LAN Unit into the USB (LAN)

port.

Keep the cap for later use.

4. Put the USB (LAN) port cover back into place.

Insert the catch of the USB (LAN) port cover into the groove of the

projector cabinet, and then tighten the screw to secure the port
cover.

To install the USB Wireless LAN Unit, disconnect the power cord and
use the above procedure.

NOTE:

• The green LED on the USB Wireless LAN Unit flashes to show that Wireless

LAN Unit is working. If the USB Wireless LAN Unit is incorrectly attached,

the blue LED will not flash.

• Do not press the button on the USB Wireless LAN Unit. The button will not

work with this model.

Removing and attaching the USB Wireless LAN Unit

NOTE:

• The USB Wireless LAN Unit must be inserted into the USB Wireless LAN Unit port in the correct direction. It cannot be inserted

in the reverse direction. If the USB Wireless LAN Unit is inserted in the reverse direction with excessive force applied, the USB

port may break.

• Before touching the USB Wireless LAN Unit, touch a metallic object (such as a door knob or aluminum window frame) to discharge

the static electricity from your body.

• Always insert or remove the USB Wireless LAN unit when the main power is turned off. Failure to do so may cause projector

malfunction or damage to the USB wireless LAN unit. If the projector will not work correctly, turn off the projector, disconnect

the power cord, and then connect it again.

• Do not insert other USB devices into the USB Wireless LAN unit port. Do not insert the USB Wireless LAN unit into the USB (PC)

port (Type B).

Summary of Contents for NP-P350W































































































































































































































Search results

Summary of Contents for NP-P350W

Reviews:

Related manuals for NP-P350W

Brands by name

Popular brands

NEC NP-P350W, User Manual

Search results

Summary of Contents for NP-P350W

Reviews:

Related manuals for NP-P350W

Brands by name

Popular brands