ND-70348 (E)
CHAPTER 4
Page 462
Revision 3.0
ARTKN
ARTKN: Assignment of Route Trunk Data for NDM
1. General
As the function of ALRTN and ATRK commands are combined into this command, it is used to allocate both
the Logical Route Number and the Trunk number (TK) at the same time. The data assigned by this command is
written in Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Lo-
cal Node (LN).
2. Precautions
1.
This command can be used only logging in to NCN.
2.
When the Logical Route data is deleted by this command, ATRK data of FPC designated Node is also
deleted. When you want to delete the allocated Logical Route data only, use ALRTN command.
3.
To delete the ATRK data is failed, only the deletion of allocated Logical Route is activated.
4.
This command is available since Release 7 software enhancement.
3. Data Entry Instructions
ROUTE
NUMBER
(RT)
TRUNK
NUMBER
(TK)
LOGICAL
ROUTE
NUMBER
(LGRT)
FUSION
POINT CODE
(FPC)
1-253
LINE EQUIPMENT NUMBER
(LENS)
MG
U
G
LV
TENANT
NUMBER
(TN)
LGRT
LGRT is the unique number allocated to each
external trunk route in the Fusion network.
Assign FPC of each node to
which the external trunk
route belongs.
FPC
Assign all external routes
in the Fusion network.
RT
Enter unique trunk number
with a range from 1 to 255.
TK
TN
The TN parameter is appended when the external
trunk route number is entered in RT parameter.