- 29 -
付録 A Fibre Channel ストレージ装置からの起動
本製品から接続した Fibre Channel ストレージ装置に OS をインストールして起動することが出来ます。
この場合は本製品の BIOS/UEFI 設定の変更が必要になりますので、説明に従って正しく設定をおこなってくださ
い。
本製品から接続した Fibre Channel ストレージ装置に OS をインストールしない場合は
BIOS/UEFI 設定の変更を行わないでください。
サポートしている OS と Fibre Channel ストレージ装置の組み合わせ以外で OS インストー
ルを行わないでください。サポートしている OS と Fibre Channel ストレージ装置の組み合
わせについては本製品を購入された販売店または保守サービス会社にお問い合わせく
ださい。
事前準備
本製品を取り付ける本体装置、インストールを行う Fibre Channel ストレージ装置に対して以下の準備をお
こなってください。
<本体装置>
Fibre Channel ストレージ装置から起動を行う本体装置に対して内蔵ディスクが接続されていないことを確
認してください。
内蔵ディスクが接続されているとデバイスの認識順番によりシステムが起動しない等のト
ラブルが発生することがあります。
ブートモード切り替えに対応した本体装置を使用する場合は、インストールする OS に合わせたブートモ
ードに設定してください。
インストールする OS に対して設定するブートモードが不明な場合は、本製品を購入され
た販売店または保守サービス会社にお問い合わせください。
<Fibre Channel ストレージ装置>
事前にインストールを行う Fibre Channel ストレージ装置に LUN 0 のディスク領域を構成し、本製品から認
識できる状態にしておいてください。
OS をインストールする LUN(Logical Unit Number)は「0」である必要があります。
本製品のコネクタとインストールをおこなう Fibre Channel ストレージ装置のコネクタを Fibre Channel ケーブ
ルで接続してください。
BIOS/UEFI 設定変更時には誤って設定してしまうことを防ぐ為、OS インストールの際に
はブートさせる Fibre Channel ストレージ装置のみ接続するようにしてください。
準備が完了したら、ブートモードに合わせた設定変更をおこないます。
重要
重要
重要
重要
重要