NEC NC900C Page 41 Installation Manual Download

Page: 41 / 104

Setting Up Your Projector

2-5-1. Removing the lens

Preparation:

[1] Return to the center position. (page 73)

[2] Turn off the main power and unplug the power cable.

[3] Wait for the projector to cool sufficiently before removing the lens, before removing the front cover. (page

25)

Rotate the lens counterclockwise while holding down the RELEASE LEVER.

The lens unit can be removed from the projector.

RELEASE LEVER

Slowly remove the lens from the projector by pulling it straight out.

After removing the lens, attach the lens cap to both the front and back of the lens for proper storage. If the projector
is stored without the lens, attach the dust cover to the lens hood.

Mount the front cover to the projector.

This completes the remove of the lens.

Summary of Contents for NC900C









































































































Search results

Summary of Contents for NC900C

Reviews:

Related manuals for NC900C

Brands by name

Popular brands

NEC NC900C, Installation Manual

Search results

Summary of Contents for NC900C

Reviews:

Related manuals for NC900C

Brands by name

Popular brands