NC800C
4. Projector Adjustment
E-35
[7]
Loosen the two pan angle
adjusting/fixing screws (hex
screws) and shift the anamorphic
lens horizontally so that the
projected image becomes as
illustrated below. Securely tighten
the screws after completing the
adjustment of pan angle.
Note: Be careful not to allow the
anamorphic lens to get into contact with
the primary lens when the former is
panned. If the two lenses eventually
meet, repeat step (2) above.
7
pan angle adjusting/fixing screws
Direct the
anamorphic
lens to the
right
Direct the
anamorphic
lens to the
left
Adjust until horizontal distortions
are removed.