NEC NC2041L Page 68 User Manual Download

Page: 68 / 88

6. Appendix

6-2-4. TEMP. indicator

Indicator condition

Projector condition

Note

Blinking light

Red

The projector temperature rises close to the operating
temperature limit.

An error message is displayed in
the LCD screen.
Check the content of the error.

Steady light

Red

The projector temperature exceeded the operating
temperature.

An error message is displayed in
the LCD screen.
Check the content of the error.

6-2-5. LIGHT indicator

Indicator condition

Projector condition

Note

Off

The light source is off.

Steady light

Green

The light source is on.

6-2-6. STATUS indicator

Indicator condition

Projector condition

Note

Off

The projector power supply is off.

Blinking light

Orange

State from turning the power off to entering standby mode.

Wait for a moment.

Green (cycle of 1
second)
(Note 1)

The projector is getting ready to turn on.
The douser is closed.

Wait for a moment.

Green (cycle of 2
second)
(Note 2)

The projector is turned on with light off.

Red
(With buzzer)

Safety problem, error.

An error message is displayed in
the LCD screen.
Check the content of the error.

Red
(Without buzzer)

Error with possible image project under certain conditions.

An error message is displayed in
the LCD screen.
Check the content of the error.

Steady light

Green

The projector is turned on.

Orange

The projector is in standby.

Red

Error at a level with not affect on projection.

An error message is displayed in
the LCD screen.
Check the content of the error.

(Note 1) Repeats 0.5 seconds on

→

0.5 seconds off.

(Note 2) Repeats 1.5 seconds on

→

0.5 seconds off.

6-2-7. POWER indicator

Indicator condition

Projector condition

Note

Steady light

Blue

While the projector software is starting.

Wait for a moment.

Orange

The projector power supply is on, or the projector is in
standby.

Green

The projector is turned on.

Blinking light

Blue

While the projector software is starting.

Wait for a moment.

Green

The projector is getting ready to turn on.
State from turning the power off to entering standby mode.

Green (cycle of
3 second)
(Note 1)

When the sleep timer is activated.

(Note 1) Repeats 2.5 seconds on

→

0.5 seconds off.

Summary of Contents for NC2041L

























































































Search results

Summary of Contents for NC2041L

Reviews:

Related manuals for NC2041L

Brands by name

Popular brands

NEC NC2041L, User Manual

Search results

Summary of Contents for NC2041L

Reviews:

Related manuals for NC2041L

Brands by name

Popular brands