NEC NC1802ML User Manual Download Page 69

Page: 69 / 81

6. Appendix

When “Manual” is selected, specify the log file writing period. For how to enter numerals, refer to “4-1-3. How to enter
alphanumeric characters” (See page

). If you press the ENTER button, the display advances to the following screen.

←

Enter the date/time to start writing.

←

Enter the date/time to stop writing.

←

The log file writing period is displayed.

Press the ENTER button.

Confirm the log file writing period, press the LEFT/RIGHT button to select “Execute”, and press

the ENTER button.

The log files of the specified period are written to the USB device. When writing completes, the following screen is
displayed.

TIP

If you select “Cancel” and press the ENTER button, the writing of log files is stopped, and the display returns to the
normal screen.

Press the ENTER button.

The display returns to the normal screen.

Remove USB memory from the USB port of the main unit.

Summary of Contents for NC1802ML


















































































Search results

Summary of Contents for NC1802ML

Reviews:

Related manuals for NC1802ML

Brands by name

Popular brands

NEC NC1802ML, User Manual

Search results

Summary of Contents for NC1802ML

Reviews:

Related manuals for NC1802ML

Brands by name

Popular brands