NEC NC1802ML, User Manual

Page: 72 / 81

72
6. Appendix
6-6. Specifications
6-6-1. Projector
Model name DLP Cinema ® Projector Head : NP-02HD
Light Module NP-24LU01 NP-20LU01 NP-18LU01
DLP Cinema
®
Projector NP-NC2402ML NP-NC2002ML NP-NC1802ML
Projection method 3 chip DLP Cinema
®
method
0.98-inch DC2K chip
Panel resolution 2048
×
1080
Light type Laser Diode
Screen sizes Max. 22 m Max. 20 m Max. 19 m
@14ft-L / Screen Gain 1.8 (Depends on setup conditions)
Contrast ratio 2000:1 with DCI specified color representation
Lens adjustment function Motorized lens shift (vertical/horizontal), motorized zoom, motorized focus, douser
Signal input ports When shipped from factory: Empty (for mounting optional components) (Note 1)
External Control RS-232C (D-sub 9pin) x 1
GPIO port (D-sub 37 pin) x 1
Service terminal (stereo mini jack) x 1
3D CTL (D-sub 15 pin) x 1
USB (Type A) x 1
Interlock port x 1
Ethernet port (G-bit RJ-45) x 1
Power supply voltage With a C1 connection (Note 3):
Single-phase AC 200V-240V 50/60 Hz (projector power light power supply)
With a C2 connection (Note 3):
Single-phase AC 100V-240V 50/60 Hz (projector power supply)
Single-phase AC 200V-240V 50/60 Hz (light power supply)
Input current With a C1 connection (Note 3):
Projector power light power supply: 18.1A
With a C2 connection (Note 3):
Projector power supply: 6.0A (for AC 100V), 2.9A (for AC 220V)
light power supply: 15.2A
Power consumption NP-24LU01(Note 4) NP-20LU01(Note 5) NP-18LU01(Note 5)
With a C1 connection
(Note 3)
Projector power light
power supply
3,600 W 2,977 W 3,122 W
With a C2 connection
(Note 3)
Projector
power supply
for AC 100 V 599 W 547 W 468 W
for AC 220 V 574 W 520 W 452 W
light power supply 3,026 W 2,457 W 2,670 W
Cooling method Air cooling system and liquid cooling system
Noise level 50 dB or less
Installation Orientation: Desk/ front, desk/ rear, ceiling/ front, ceiling/ rear
Net weight 150 kg (total weight of projector and NP-24LU01 or NP-20LU01
light module. Not including the lens.)
141 kg (total weight of projector
and NP-18LU01 light module.
Not including the lens. )
Dimensions 697 mm (width) × 1,095 mm (depth) × 509.5 mm (height)
Environment Operating temperature: 10 to 35°C
Operating humidity: 10 to 85% (non-condensing)
Storage temperature: -10 to 50°C
Storage humidity: 10 to 85% (non-condensing)
Operating altitude: 0 to 3000 m/9800 feet
(Note 1) The video input slots are empty when the device is shipped. Input ports can be added by mounting option boards, which
are sold separately. (See page 78 )
(Note 2) The value is typical.
(Note 3) A “C1 connection” is when the AC power is supplied to the projector power supply and the light power supply with a single
power cable.
A “C2 connection” is when the AC power is supplied to the projector power supply and the light power supply by separate
power cables.
(Note 4) When the Overdrive mode setting on
(Note 5) When the Overdrive mode setting off
* For the standards related to laser products to which this projector conforms, see the section “To ensure safe use of this unit, be
sure to read this before using the unit” (page 2 ).
* Note that these specifications and design can change without prior notice.