NEC NC1500C User Manual Download Page 38

Page: 38 / 62

4. Using Menus

4-6. Information

Displays the hours of lamp bulb use, the version information and error codes.

4-6-1. Lamp

Displays information relating to the lamp. (Such as lamp output and the information of lamp bulb.)

Output

Displays the lamp brightness (output) setting.

←

Displays the set current (A).

←

Displays the power consumption (kW).

Bulb Type [A]

Displays the registered name and the maximum/minimum current setting of the currently used lamp bulb.

←

Displays Bulb Entry registered name.

←

Displays Bulb Entry maximum/minimum currents (A).

Bulb Type [W]

Displays the registered name and the lamp rated output (kW) of the currently used lamp bulb.

←

Displays Bulb Entry registered name.

←

Displays Bulb Entry lamp rated output (kW).

Bulb Type [H]

Displays the registered name and the lamp bulb warning time (Bulb Warning Time) and setting of the currently used lamp bulb.

←

Displays Bulb Entry registered name.

←

Displays Bulb Warning Time setting (H).

4-6-2. Macro Key

Displays the titles assigned to the macro keys of 1 to 8 on the projector’s control panel.

←

Selects the macro key number whose contents you want to display.

←

Displays the assigned title numbers.

←

Displays the registered names of the assigned titles.

Summary of Contents for NC1500C































































Search results

Summary of Contents for NC1500C

Reviews:

Related manuals for NC1500C

Brands by name

Popular brands

NEC NC1500C, User Manual

Search results

Summary of Contents for NC1500C

Reviews:

Related manuals for NC1500C

Brands by name

Popular brands