NEC N8803-034, User Manual

Page: 34 / 44

- 34 -
4-1. Selection and Installation of Bracket
A standard type bracket is installed on this product. When fixing this product to a PCI slot
optimized for the low profile type, replace the bracket with the attached standard one. The
procedure is as follows.
Hint
„ Exchange of a bracket uses the minus screwdriver suitable for the size of a
screw.
１ .
Remove the two screws.
２ .
Remove the bracket from this product.
３ .
Install the low profile bracket to this product.
４ .
Tighten the two screws.
Hint
„ Follow the same procedure when the standard bracket is replaced with the low
profile bracket.
Important
„ Make sure to keep the removed bracket carefully.
②
①
③
④