4-1. Selection and Installation of Bracket
A standard bracket is installed on this product. When fixing this product to a PCI slot optimized for
the low profile type, replace the bracket with the attached low profile one. The procedure is as
follows.
Exchange of a bracket uses the minus screwdriver suitable for the size of a screw.
1
.
Remove the SFP+ module temporarily.
Remove the dust cover and pull down the lever of the SFP+ module to release the
lock, and then pull the SFP+ module to remove.
2
.
Remove the two screws and remove the bracket from this product.
Tips
Tips
(1)
(2)
(1)
(2)
- 34 -
Summary of Contents for N8190-7153
