NEC N8190-167, User Manual

Page: 38 / 53

- 36 -
1. About This Product
1-1. Specifications
Item Specification Remarks
Fibre Channel interface
N8190-167 Short wave laser (LC connector) x 1
N8190-168 Short wave laser (LC connector) x 2 SFP+ module x1
SFP+ module x2
Fibre Channel link rate 32Gbps,16Gbps Auto
PCI Express Connector x8
Support
PCI Express 3.0
Physical dimensions 168mm(W) x 68mm(D) MD2
Weight Under. 0.2kg
Operating voltage PCI Express 12V
Power consumption
Typical 7.5W
Max 9.5W
Environmental
condition
Operating
Temperature 0 - 45 degrees C
Humidity 10 - 90 %
No condensation
Storage
Temperature -20- 70 degrees C
Humidity 5 - 95 %
1-2. Features
This product is a Fibre Channel host bus adapt er card. This product has two Fibre Channel interface
connectors.

Do not connect this product to a computer or Fibre Channel device that is not
recommended by NE C Corporation. If the product is connected t o a comput er or
Fibre Channel device that is not recommended by NEC Corporation, the product
may malfunction or fail.

Please contact the retailer or s ervice cent er for the information on recommended
computers and or Fibre Channel devices.

This product is designed to transfer data at high-s peed. For the best performance, it
is important to avoid your PCI Express bus becoming a bottleneck that will result in
slow data trans fer.
You can connect this product in more than x8 bandwidth PCI
Express 3.0.
1-3. Before Using
In addition to documentation you receive with your Fibre Channel (FC) Host Bus Adapter
(HBA), you must review the NEC-specific FC HBA documentation and ensure that you have the
latest driver, firmware, and supplemental information.
Access to the NEC Web site (http://www.nec.com/express/).
Notice