4-3.
Install the Card
Install this product in the computer following the steps described on the next step.
WARNING
Do not handle this product during an electrical storm.
When installing this product in the computer, please read the user's manual of the computer and
unplug the power plug from the electrical outlet. Do not insert or remove the power plug with wet
hands. Doing so can lead to faults or electric shock.
Do not pull on the lead when unplugging the power plug from the electrical outlet. Doing so can
damage the power cord and lead to shorting or electric shock.
CAUTION
Avoid installation in extreme temperature conditions.
Immediately after the computer is powered off, its internal components such as hard
disks are very hot. Leave the computer until its internal components fully cool down
before installing/removing any component.
Connect firmly.
Please connect the product to the computer firmly. A loose connection can cause a
contact failure and can lead to smoke or fire.
1
.
Confirm the power to the computer is off (power lamp off), then unplug the power cord from
the electrical outlet.
Important
If the power to the computer is on (power lamp on), shut down the operating
system and then turn off the computer.
2
.
Remove the cover and other components of the computer if necessary following the
instructions in the user's manual of the computer.
3
.
Install this product in the PCI Express slot as following the instructions described in the user's
manual of the computer.
The method of installing and removing the
PCI card
and the location of the PCI
Express slot differ in different computers. Please read the user's manual of the
computer for confirmation.
Check
If this product is not correctly connected to the PCI Express slot of the
computer, remove the product and connect it again. Using excessive force can
lead to damage.
4
.
Replace the cover and components removed in item 2.
5
.
Plug the power cord of the computer into the electrical outlet.
- 35 -
Summary of Contents for N8190-131
Page 46: ... Memo 44 ...
Page 47: ... Memo 45 ...