(1) PCI Express connector
Connector to be inserted into the PCI Express slot of the computer.
Hint
This product is connectable to a PCI Express x4, x8 or x16 slot.
(2) Bracket
Bracket to fix this product to the extended slot of Computer.
Hint
When fixing this product to a PCI Express slot optimized for the low profile type,
replace the bracket with the attached low profile one.
(3) Fibre Channel Connector (Port0/Port1)
Connector (LC Connector) used to connect this product to a Fibre Channel device.
Do not remove dust cover when not connected to Fibre Channel device.
(4) LED (Port0/Port1)
Two LED for each port (Port0/Port1) give a visual indication of the operating state.
The slow blink rate is 1 Hz; the fast blink is 4 Hz; the flashing state is an irregular on/off appearance
reflecting program activity.
Green LED
Yellow LED
State
Off
Off
Wake-Up Failure (Dead Board)
Off
On
POST Failure (Dead Board)
Off
Slow Blink
Wake-Up Failure Monitor
Off
Blink(1Hz)
Failure in POST
Off
Flashing
POST Processing in Progress
On
Off
Failure While Functioning
On
On
Failure While Functioning
On
Blink(2Hz)
2Gbps Link Rate – Normal, link up
On
Blink(4Hz)
4Gbps Link Rate – Normal, link up
Slow Blink
Off
Normal – Link Down
Important
If the product fails at POST, please check the following items.
- Is the product installed in the computer correctly?
- Are all Fibre Channel cables and power cords connected correctly?
(5)IEEE Address
IEEE Address of the product is displayed by this label.
Hint
The IEEE address correspond to the lower 12 figures of Worldwide Name(WWN)
of the product
- 31 -
Summary of Contents for N8190-131
Page 46: ... Memo 44 ...
Page 47: ... Memo 45 ...