Built-in AIT 77
3.5 mm
metric screw
Rail
Front cover
Fig. 3
• The screws needed with the 5.25-in and 3.5-in devices are the same.
• Always use the screws that are provided with this device. The screws that
are provided with this device are metric screws (length: 5.0 mm; length
below washer: 3.5 mm). Using screws that are longer than the screws that
are provided with this device could result in damage to the device.
2
Connect the Built-In AIT to the motherboard and the CD-ROM/RW drive using the provided
interface cable.
Caution
Do not use any damaged power cord.
If the power cord is damaged, immediately replace it with a new part of same
type. Do not repair the damaged section for reuse. Otherwise, the section
repaired with vinyl tape or the like will be overheated to cause an electric
shock or a fire.
Important
Make sure that you use the interface cable provided with the Built-In AIT.
