NEC N8151-34A, User Manual

Page: 86 / 108

84 Built-in AIT
For Windows 2000 Users
1
Click the [Start] button, then point to [Settings] and click [Control Panel]. Then click [System].
The [System Properties] dialog box appears.
2
Click the [Hardware] tab, then click the [Device Manager] button.
The [Device Manager] dialog box appears.
3
Confirm that [SONY SDX-500C SCSI Sequential Device] is displayed under [Other devices],
and double click [SONY SDX-500C SCSI Sequential Device].
The [SONY SDX-500C SCSI Sequential Device Properties] dialog box is displayed.
4
Click the [Driver] tab, and click the [Update Driver] button.
The [Upgrade Device Driver Wizard] appears.
5
Click the [Next] button.
The [Install Hardware Device Drivers] screen appears.
6
Select [Search for a suitable driver for my device (recommended)], and click the [Next] button.
The [Locate Driver Files] screen appears.
Insert the floppy disk provided.
7
Place a checkmark in the [Floppy disk drives] checkbox, and click the [Next] button.
The basic processing unit starts searching for driver files.
8
Confirm that [This wizard upgrades drivers for the following hardware device: SONY SDX-
500C SCSI Sequential Device] is displayed, and click the [Next] button.
The [Insert Disk] dialog box appears.
9
Click the [OK] button.
The driver is copied, then the [Files needs] dialog box appears.
10
Confirm that “A” is specified as the file copy source, and click the [Browse] button. Then
select sonyait2.sys, and click the [Open] button.
The screen returns to the [Files needs] dialog box.
11
Click the [OK] button.
The [Completing the Upgrade Device Driver Wizard] screen is displayed.
12
Click the [Finish] button.