35
17.
Make sure that a filter is mounted on the provided dust-proof air duct,
insert the four claws into the grooves on top of the server
(when the server is vertically installed), as shown in the figure below.
18.
Stick the attached name plate on the shadow area of the figure below.
Claws (4 places)
Air-cooling model: G110d-S, Silver
Water-cooling model: G110d-S, Navy blue
iStorage model: NS100Tb, Silver
※
To remove the dust-proof air duct from the server chassis,
put your finger in the hole at rear of the dust-proof air duct,
and lift it to remove.
Filter
Gripping hole
