![background image](http://html.mh-extra.com/html/nec/n8118-01/n8118-01_user-manual_247553028.webp)
- 26 -
2-2.Installation to the server
1. Confirm the power to the server is off (power lamp off), then unplug the power cord from the
electrical outlet.
If the power to the server is on (power lamp on), shut down the operating system
and then turn off the server.
2. Remove the cover and other components of the server if necessary following the instructions in
the user's guide of the server.
3. Install this product in the PCI slot as following the instructions described in the user's guide of
the server.
The method of installing and removing the PCI card and the location of the PCI
slot differ in different servers. Read the user's guide of the server for confirmation.
If this product is not correctly connected to the PCI slot of the server, remove the
product and connect it again. Using excessive force can lead to damage.
4. Replace the cover and components removed in item 2.
5. Plug the power cord of the server into the electrical outlet.
2-3.Installation of the Driver/Utility
To use this product, the Driver/Utility for your operating system must be installed. For detailed
information, refer to the “N8118-01 PCIe SSD Adapter 365GB Driver/Utility User’s Guide” which is
included in “N8118-01 PCIe SSD Adapter 365GB Driver/Utility CD” as “\doc\ENG\Setup.pdf”.
Check
Notice