6
856-124600-153-03
Precautions for Safety
General Precautions
Do not use the product for services where critical
high availability may directly affect human lives.
The product is not intended to be used with or control facilities or
devices concerning human lives, including medical devices, nuclear
facilities and devices, aeronautics and space devices, transportation
facilities and devices; and facilities and devices requiring high
reliability. NEC assumes no liability for any accident resulting in
personal injury, death, or property damage if the product has been
used in the above conditions.
Do not continue to use the equipment if you detect
smoke, odor, or noise
If the equipment emits smoke, odor, or noise, immediately unplug the
power cord of the server. Then, contact your service representative.
Continuing to use the product in such condition may cause a fire.
Do not insert a wire or metal object
Do not insert a wire or metal object into this product.
There is a risk of an electric shock.
Keep water or foreign matter away from the
equipment.
Do not let any form of liquid (water etc.) or foreign matter (e.g., pins
or paper clips) enter the equipment. Failure to follow this warning
may cause an electric shock, a fire, or a failure of the equipment.
When such things accidentally enter the equipment, immediately
turn the power off and unplug the power cord. Then, contact your
service representative.
Precautions for Installation, Relocation, Storage and
Connection
Do not use any unauthorized interface cable.
Use only interface cables authorized by NEC and locate a proper
device and connector before connecting a cable. Using an
authorized cable or connecting a cable to an improper destination
may cause a short circuit, resulting in a fire.
Also, observe the following notes on using and connecting an
interface cable.
-
Do not use any damaged cable connector.
-
Do not step on the cable.
-
Do not put any object on the cable.
-
Do not use the card with the loose interface cable connection.
-
Do not use any damaged cable.
See also
“
Network Cables
”
Do not use the equipment in the place where
corrosive gases exist.
Make sure not to locate or use the equipment in the place where
corrosive gases (sulfur dioxide, hydrogen sulfide, nitrogen dioxide,
chlorine, ammonia, ozone, etc.) exist.
Also, do not set it in the environment where the air (or dust) includes
components accelerating corrosion (ex. sulfur, sodium chloride) or
conductive metals. There is a risk of a fire due to corrosion and
shorts of an internal printed board.
Contact your service representative for the place appropriate to the
equipment.
Precautions for Handling of Internal Devices
Do not disassemble, repair, or modify the product
yourself
Do not disassemble, repair, or modify this product. Doing so may
cause an electrical shock or a fire. Do not put the product close to
fire, or immerse it in water. Doing so may cause an explosion. If the
product does not function normally, contact your service
representative.
Unplug all power cords
Turn the power off and unplug the power before removing the
computer's cover. Failure to do so could endanger you and may
damage the adapter or computer
Precaution on disposing or transferring
- Follow the ordinances by your local government when you are
disposing the product. Contact the local government for more
information.
- If you are transferring this product to other people, be sure to
transfer all items that come with the product including this guide
along with the product.
Avoid installation in extreme temperature
conditions.
Immediately after the server is powered off, its internal components
such as heat sink are very hot. Leave the server until its internal
components fully cool down before installing/removing any
component.
Ground yourself to dissipate any static charge
before handling the adapter.
To prevent any damage on components due to static electricity,
make sure to discharge static electricity from yourself before you
touch the adapter.
Don
’
t touch uncoated metal parts on adapter.
Never touch the
adapter’s LAN port, terminals of components or
uncoated metal parts on adapter. Otherwise, taint, erosion or
others may cause loose connection. Do not touch this product
with wet or dirty hands.
Excessive force could break the connector.
On installing this adapter, do not insert it by force. Otherwise, the
adapter and the server may be damaged.
Don
’
t touch the tip of bracket to other parts of
server.
When you insert the 4 adapter into expansion slot, be careful not to
touch the tip of bracket to other parts of server (such as other
components or board). Otherwise, they may be damaged.
Firmly connect the network cable.
When connecting the cable, insert the cable connector until you
hear a click sound.
Do not give a shock or vibration.
Do not give a shock or vibration to the cable and connector
connecting portion during operation.
Anti-static Measures
Installing or Uninstalling Internal Optional Devices
Notes before carrying out the work
(1)
T
o avoid electric hazard and malfunction, be sure to turn off
the Power switch of this product and unplug the power cord
from an outlet before carrying out the work.
However, there is no need to do this if the internal optional
device is hot-swappable.
(2)
This internal optional device consists of static-sensitive
electronic components. To avoid failures caused by static
electricity when installing or uninstalling the internal optional
device, wear an anti-static wrist strap on your wrist
and provide earthing before carrying out the work.
And also connect a wrist strap to earth
ground when you
wear a wrist strap.
(3)
Handling of cables
When connecting a cable (e.g., LAN cable), static electricity
may also be charged due to friction against the floor.
Connecting a charged cable with an I/O device may cause
damage to the devices. It is recommended to discharge
static electricity before connecting a cable by using
neutralization apparatus and so on.
Limitations
Supported OS
For OS that support will depend on the device. Please refer to the support
matrix.
Functions (NOT supported)
- PCI EXRESS Hot-plug technology
- Network Boot
iSCSI or RPL ,etc. (except PXE)
During POST, when you exit the Setup Menu of Intel Boot Agent by typing F4
key, the offline utility of the server will start after POST. Please close the offline
utility and continue booting the system.
This event only occurs in legacy mode
- Wake on LAN
Description
1
2
3
SideB
Side A
1. Bracket
This product has 2 type of bracket. By default, Low-profile type is attached. If
need to mount on Full-height PCI-EXPRESS slot, you can change to another
bracket. See
“Bracket Replacement”.
2. LAN Port
A connector provides to access a network. For the types of connectable
cables and how to connect, see “Network Cables”. Port id is numbered from
“PORT1” to “PORT4”. See the figure.
3. PCI-EXPRESS connector
This product conformed to PCI EXPRESS 2.1. Supported speed is 5GT/s
only. This product has x8 lane edge. The logical lane size is x8 lane
This product can be installed to a slot more than x8lane (or higher), and is
compliant with PCI-EXPRESS 2.1 (or higher) specifications.
NOTE:
Check the PCI-EXPRESS slot which can be attached with reference
to User’s Guide of Express Server before attaching this product.
Lamp
P0
P1
10G=GRN
1G=YLW
LINK/
ACT
=GRN
LNK/ACT
SPEED
PORT 0
PORT1
LNK/ACT
SPEED
Lamp
Status (color)
Meaning
SPEED
On (Green)
Link at 10Gbps speed.
On (Orange)
Link at 1Gbps speed
Off
Link at 100Mbps speed
LINK /
ACT
On (Green)
Link is up
Blink (Green)
Traffic
Off
Link is down
NOTE:
If the system is in sleep state, the lamp may does not display
correctly. Communications are not affected.
