1. Installing Internal Optional Devices
Express5800/R120h-2M (3rd-Gen) User’s Guide
126
Chapter 2 Preparations
・
N8105-55 GPU Computing Card (Tesla V100)
Classification
Category
200-240 VAC Input
Number of installed
GPU : 1
Number of installed
GPU : 2
Number of installed
GPU : 1~3 *4
Options that
must be
selected
GPU Computing
Card Cable
K410-387(00) (Graphics Card Power Cable(8Pin, Type B)) x1set *1
Power Supply Unit
N8181-162 (1600W Hot Plug Power Supply) x2
Fan
N8181-158 (High Performance Fan Kit) *2
Heatsink
N8101-1286 (High Performance CPU Heatsink Kit) *3
Riser Card
N8116-66
Primary Riser Card
(2xPCI + 1xGPU
Installation Kit)
N8116-66
Primary Riser Card Kit
(2xPCI + 1xGPU
Installation Kit)
N8116-67
Secondary Riser Card Kit
(2xPCI + 1xGPU
Installation Kit)
N8116-66
Primary Riser Card (2xPCI +
1xGPU Installation Kit)
N8116-67
Secondary Riser Card
(2xPCI + 1xGPU Installation
Kit)
N8116-78
Tertiary Riser Card Kit
(1xPCI,1xGPU Installation
Kit)
Memory
No restriction
N8102-720
～
N8102-724
8GB
～
64GB DDR4-2933 REG Memory Kit
Options with
restrictions on
mounting
CPU
The following CPUs cannot be mounted
Platinum : 8280, 8280M, 8280L, 8268, 8260, 8260M,
Gold : 6254
Internal Drive
No restriction
Number of units that can be mounted: 8 or less
Middle/Rear Drive
Cage
Cannot be mounted
PCI Board *4
No restriction
Dustproof Filter Kit
None
Up to 3
Up to 1
Operation
Temperature
－
N8100-2836F (8x2.5-inch Drive Model) : Up to 30
C *5
N8100-2837F/-2838F 24x2.5-inch Drive Model / 8x3.5-inch Drive Model : Up to 25
℃
*1 One set of K410-387(00) (Graphics Card Power Cable (8Pin, Type B)) includes 3 auxiliary power cables.
*2 N8181-158 (High Performance Fan Kit) is mounted on the 24x 2.5-inch drive model as standard.
*3 N8101-1286 (High Performance CPU Heatsink Kit) is provided as standard for CPUs with a TDP of 130W or more and
Xeon ® Gold 5222 Processor.
*4 The number of PCI Boards does not include N8105-55 (GPU Computing Cards (Tesla V100)), RAID Controllers (AROC),
and LOM Cards.
*5 When a front cage is added, the operation temperature must be 25
C or below.
Installation
Please prepare the following before installing the option.
Parts included in the option kit
T-30 hexalobular driver
T-10 hexalobular driver
Option, high performance heat sink
Option, high performance fan
To install the components, follow these steps.
Note
In order to prevent damage to the device due to improper cooling or high
temperature, do not operate the device unless all the PCIe slots are installed with
either a slot cover or a PCI board.
1.
See steps 1 to 7 in
Chapter 2 (1.2 Overview of Installation and Removal)
for preparations.