NEC Mobile Suite User Guide for N411i
Rev 1.0 6/May/2005
The purpose of this step is to define which of the CSV file fields correspond to the PIM fields
(mapping). The user can do this by selecting a field in the
From
table (on the left) and then click on the
right arrow button (
) placing it in the
To
table (on the right). It will be placed in the
Mapped From
column. If no position is selected in the
To
table, the CSV field will be placed in its first available
position in the
Mapped From
column.
If the
[Default Mapping]
button is pressed an automatic correspondence will be done, in which the
first CSV field corresponds to the first PIM field, the second CSV field corresponds to the second PIM
field and so on and so forth.
On the right of the
To
table there are two buttons, an up arrow and a down arrow. These will allow the
user to change the order of the fields by selecting the intended one and pressing the up or the down
arrow as many times necessary until its in the required position.
CSV fields can be removed from the
To
table by selecting them and clicking on the left arrow button -
. Pressing the
[Erase Mapping]
will clear all configured fields in the
Mapped From
column.
After all is set press
[Next]
.
This will be the next screen presented to the user.
