English−49
English
Video Menu
Input settings
Input detect
Selects the method of input detection the monitor uses when more than one signal source is connected.
None: The monitor does not search for video signal on the other input connections.
If video signal is lost on the current input, or if the monitor is manually switched to an input that
does not have video signal, the screen will go black and the LED will flash.
First: The monitor does not search for a video signal on the other input connections while the current
input has a video signal.
If the current input connection does not have video signal present, the monitor will search for video
signal on the other video input connections. If a video signal is found, the monitor will switch from
the current input to the input with the active video source automatically.
Last: The monitor actively searches for a video signal on the other input connections, even while
the current video signal is present. When a new video signal source is applied to another input
connection, the monitor automatically switches to the new found video source.
If the video signal is lost on the current input connection, the monitor will search for video signal on
the other video input connections. If a video signal is found, the monitor will switch from the current
input to the input with the active video source automatically.
Blank signal skip
Skip no signal inputs when you change the input signal using the
Input key.
DDC/CI
Turns on or off the two way communication and control of the monitor via the video cable.
Advanced signal settings
DisplayPort version
(DP1/DP2/USB-C)
Selects the DisplayPort version [1.1a] or [1.2].
[1.2] is the recommended setting. If there are compatibility problems, please try using [1.1a].
HDMI mode
(HDMI1/HDMI2)
Selects the HDMI mode from [Mode1] or [Mode2]
[Mode2] is the recommended setting. If there are compatibility problems, please try using [Mode1].
HDCP version
Selects the digital copy protection version from [HDCP2.2] or [HDCP1.4]/[HDCP1.3].
OTEE:
[HDCP2.2] is the recommended setting. If there are compatibility problems, please try using
[HDCP1.4]/[HDCP1.3]. When [1.1a] is selected in [DisplayPort version], [HDCP1.3] is set
automatically
HDR
Select whether to support HDR signal. [Enable] is the recommended setting. If there are compatibility
problems, please try using [Disable].
OTEE:
When [1.1a] is selected for the DisplayPort Version or [Mode1] for the HDMI mode, [HDR] is
disabled automatically.
Bit rate
(DP1/DP2/USB-C)
Selects the bitrate of the video signal from [HBR] or [HBR2].
[HBR2] is the recommended setting. If there are compatibility problems, please try using [HBR].
When [1.1a] is selected in [DisplayPort version], [HBR] is set automatically.
Equalizer
Compensates the video signal for better image stability.
If the image flashes or picture noise occurs, please change the setting.
Audio
Audio Menu
Audio settings
Source
Selects the audio input source: [Active picture], [Picture1], [Picture2], [Picture3], [Picture4].
Volume
Increase or decrease output volume level.
Mute on
Switches the audio mute on/off.
Audio delay
Synchronizes sounds and pictures by delaying the audio signal to avoid lip-sync errors.
Summary of Contents for MultiSync PA311D
Page 4: ......