English−24
Changing the Input, Picture mode, Luminance, and
Volume
Touch the monitor keys to show the keys’ guide.
OTEE: •
Touching a key will immediately open the menu for that key’s function. The keys’ functions and labels change based
on which menu is opened.
•
The functions described in this section are the default behavior for the hot-keys from default settings. Some of the
hot-keys can be customized for quick access to different functions. See
Menu
Pic.L
Lumi
Volume
Mult.P
Input
USB
Power
Changing the Input
To change the signal input, touch the
Input key.
OTEE:
If there is no active video signal on another input the monitor switches back to the current input.
For HDCP Content
HDCP is a system for preventing illegal copying of video data sent over a digital signal. If you are unable to view material via
the digital inputs, this does not necessarily mean that the monitor is not functioning properly. With the implementation of HDCP,
there may be cases in which certain content is protected by HDCP and might not be displayed due to the decision/intention of
the HDCP community (Digital Content Protection, LLC). HDCP video content is generally commercially produced Blu-rays and
DVDs, television broadcast, and streaming media services.
Changing the Picture mode
1. Touch the
Pic. L key to open the [Picture mode] selection menu (See
). Note that the current picture mode is
highlighted.
2. Touch the
Up or Down key to select a different picture mode.
3. Touch the
Exit key to save the change and close the [Picture mode] selection menu.
Summary of Contents for MultiSync PA311D
Page 4: ......