NEC MultiSync MD215MG-S5, Installation & Maintenance Manual

Page: 15 / 21

English-12
Additional Installation Information
Advanced OSD
Several control functions are available by entering the advanced OSD. These control functions are additional OSD menu items,
which are always accessible after opening the standard OSD.
Control Function Description
EDID Change the picture format to be recognized by the operating system
• Portrait format - 2048 x 2560 pixels [Factory Default]
• Landscape format - 2560 x 2048 pixels
Display Mode Change the video signal input format
• Normal Mode [Factory Default]
The display accepts the video signal with either 25Hz refresh rate (DVI Single Link) or 50Hz
refresh rate (DVI Dual Link), based on DVI 1.1 specifi cations.
• Packed Pixel Mode
The display accepts the video signal with 50Hz refresh rate in a special packed pixel data format
(DVI Single Link). This requires the use of a customized driver for the display controller. Make
sure that a customized driver is available for your specifi c display controller model. For the
availability of a packed pixel driver, please contact your supplier.
Confi guration Change luminance and gamma correction factory presets. The factory presets are:
Confi guration
Luminance (cd/m
2
)
Gamma Remark
Maximum Minimum Ambient
1 400 1.0 0.0 DICOM Default
2 430 1.5 0.0 DICOM
3 500 1.0 0.0 DICOM
These parameter may be modifi ed anytime by a new display calibration.
NOTE: Regarding display calibration, please refer to the MD215MG Calibrator Manual.
How to change the EDID setting (Portrait / Landscape)
1. Click the (+) plus button or (-) minus button on the back side of the monitor once to display the “INFORMATION” OSD.
A display, which is similar to this picture, opens on the screen.
2. Hold down the (+) plus button and the (-) minus button simultaneously for over 2 seconds.
The “SWITCHING EDID” menu opens on the screen. Select “Portrait” or “Landscape” by the (+) plus button or the (-) minus
button.