background image

11

Monitor

MultiSync

®

 M

700

Notes

Specifications

Monitor

Picture Tube

Diagonal:

17 inch

90

°

 deflection, 0.25 mm mask pitch,

Viewable Image Size:

15.6 inch

CromaClear

®

 CRT, medium-short persistence

Radius:

1210 mm

phosphor,  multi-layered, anti-static screen
coating, semi-dark-tint screen, Invar Shadow
Mask and OptiClear

®

 screen surface.

Input Signal

Video:

ANALOG 0.7 Vp-p/75 Ohms

Sync:

Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative

Display Colors

Analog input:

Unlimited number of Colors

Depends on display card used.

Synchronization

Horizontal:

31 kHz to 69 kHz

Automatically

Range

Vertical:

55 Hz to 120 Hz

Automatically

Maximum Resolution

1280 x 1024 @ 65 Hz

Maximum resolution based on horizontal
and vertical frequemcies.

Resolutions Supported

640 x 480 @ 60 to 120 Hz

Some systems may not support

Resolution based on horizontal and

800 x 600 @ 55 to 110 Hz

all modes listed.

vertical frequencies only

832 x 624 @ 55 to 110 Hz
1024 x 768 @ 55 to 85 Hz
1152 x 870 @ 55 to 75 Hz
1280 x 1024 @ 55 to 65 Hz

Active Display Area

Horizontal:

306 mm/12.0 inches

Dependent upon signal timing used,

(Factory Setting)

Vertical:

230 mm/9.1 inches

and does not include border area.

Active Display Area

316 mm/12.4 inches

Dependent upon signal timing used,

(Full Scan)

237 mm/9.3 inches

and does not include border area.

Power Supply

AC 100 – 120 V, 50/60 Hz

Current Rating

2.2A @ 100 – 120 V

Dimensions

403 mm (W) x 451 mm (H) x 450 mm (D)
15.9 inches (W) x 17.8 inches (H) x 17.7 inches (D)

Weight

18.8 kg
41.4 lbs

Environmental Considerations

Operating Temperature:

10

°

C to +35

°

C

Humidity:

30% to 80%

Feet:

0 to 10,000 Feet

Storage Temperature:

-20

°

C to +60

°

C

Humidity:

10% to 90%

Feet:

0 to 45,000 Feet

NOTE: Technical specifications are subject to change without notice.

78133441

6/24/98, 7:50 AM

13

Summary of Contents for MultiSync M500





















Reviews: