background image

English−1

Important Information

Safety Precautions and Maintenance

FOR OPTIMUM PERFORMANCE, PLEASE NOTE 

THE FOLLOWING WHEN SETTING UP AND  

USING THE LCD COLOR MONITOR:

About the Symbols

To ensure safe and proper use of the product, this manual uses a number of symbols to prevent injury to you and others as well 
as damage to property. The symbols and their meanings are described below. Be sure to understand them thoroughly before 
reading this manual.

WARNING

Failing to heed this symbol and handling the product incorrectly could result in accidents leading to 
major injury or death.

CAUTION

Failing to heed this symbol and handling the product incorrectly could result in personal injury or 
damage to surrounding property.

Examples of symbols

 Indicates a warning or caution.  

This symbol indicates you should be careful of electric shocks.

 Indicates a prohibited action. 

This symbol indicates something that must be prohibited.

 Indicates a mandatory action.  

This symbol indicates that the power cord should be unplugged from the power outlet.

WARNING

1

UNPLUG THE 

POWER CORD

Unplug the power cord if the product malfunctions.

Should the product emit smoke or strange odors or sounds, or if the product has been dropped or 
the cabinet broken, turn off the product’s power, then unplug the power cord from the power outlet. 
Failure to do so could not only lead to fire or electric shock, it could also result in vision impairment. 
Contact your dealer for repairs.

Never try to repair the product on your own. Doing so is dangerous.

2

 

 

Do not open or remove the product’s cabinet.

Do not disassemble the product.

There are high voltage areas in the product. Opening or removing product covers and modifying the 
product may expose you to electric shock, fire, or other risks.

Refer all servicing to qualified service personnel.

3

Do not use the product if it has structural damage.

If you notice any structural damage such as cracks or unnatural wobbling, please refer servicing 
to qualified service personnel. If the product is used in this condition, the product may fall or cause 
personal injury.

Summary of Contents for MultiSync M Series










Reviews: