English−8
Intel
®
SDM-L:
Remove SLOT COVER
a
and
b
(
Figure 1).
Slide the CENTER RAIL to the right and remove it. Reverse the process to reattach it (
Figure 1-1).
Figure 1
SLOT COVER
Figure 1-1
CENTER RAIL
4. Insert the Option Board into the monitor and affix it in place with the removed screws (
Figure 2).
(Recommended fasten force: 50~80 N•cm).
Figure 2
Intel
®
SDM-S
Intel
®
SDM-L
Raspberry Pi Compute Module
OTEE:
Unless your monitor is purchased as part of a special bundle package, no Option Boards will be in the box or installed
in the monitor. These are optional accessories available for separate purchase. Please contact your supplier for a list of
Option Boards available for your monitor.
Make sure the board is inserted into the slot in the correct orientation.
Do not apply excessive force to manipulate the Option Board before attaching it with screws.
AAINE:
Please refer to