background image

75

6. Using On-Screen Menu

[

Video

]

Turning On/Off 3 Dimension Separation [3D Y/C Separation]

This function turns on or off the 3 dimensional separation feature.

Off ............................... Turns off the function.

On

Still ................. Recommended for a still image.

Normal ............ The projector detects and corrects the image automatically.

Movie .............. Recommended for a moving image.

TIP: 

When the image is poor quality, turn on [3D Y/C Separate]. If there is still poor quality, try turning off [Deinterlace] or try turning

off [3D Y/C Separate] and select [Normal] in [Deinterlace].

NOTE: This feature is available for NTSC3.58 of Video signal only.

Setting Vertical Edges [Vertical Enhancer]

This function enhances the vertical edges around objects in the image.

NOTE: This function is not available for an RGB, HDTV and Component signal.

Selecting Interlace or Deinterlace [Deinterlace]

This function allows you to select between "Interlace" and "Deinterlace".

Off ............................... Project the interlaced signal.

On

Still ................. Select when a still image is displayed. When this option is selected for a moving image, jitter or artifacts

can be seen.

Normal ............ The projector automatically determines a still or moving image to display a clear picture. If selecting

[Normal] causes excess jitter or artifacts, select [Movie].

Movie .............. Select when a moving image is displayed. This will eliminate jitter and artifacts in a moving image. This

option is available only for SDTV.

Setting Telecine Mode [Telecine]

Use 3:2 pull down correction to eliminate jitter and artifacts in video.

NOTE: This feature is available only when [Deinterlace] is turned on and an SDTV signal is selected.

Off ..................................... Turns off the Telecine mode.

On

2-2/2-3 Auto ......... Detects pull-down correction method.

2-2 On .................. Uses 2-2 pull-down correction method

2-3 On .................. Uses 2-3 pull-down correction method

Summary of Contents for MultiSync LT280






































































































































Reviews: