NEC MultiSync LCD4020, User Manual

Page: 25 / 54

English
English-19
AC IN RGB/HV OUT
PC IN
VIDEO DVD/HD IN AUDIO SPEAKER
RGB/HV IN
VGA(D-SUB)
DVI(DVI-D)
HDMI Y
Cb/Pb Cr/Pr S-VIDEO IN
OUT AUDIO OUT
R L
-
--
AUDIO1 IN AUDIO2 IN AUDIO3 IN
R R
L L
IN
IN
R G B H V
R G B H V
Connecting to a Macintosh
®
Computer
Connecting your Macintosh computer to your LCD
monitor will enable you to display your computer’s screen
image. Some video cards or drivers may not display images
correctly.
To connect to the VGA connector (mini D-sub 15 pin) on
the LCD monitor, use the RGB signal cable (mini D-sub 15
pin to mini D-sub 15 pin) included with the display.
NOTE: For older Macintosh computers, use Macintosh
cable adapter to connect to your Macintosh’s video port. To
obtain the Macintosh cable adapter call NEC Display Solu-
tions of America, Inc. at (800) 632-4662
To connect to the RGB/ HVconnector (BNC) on the LCD
monitor, use a mini D-sub 15 pin to BNC x 5 signal cable
(not included)(BNC INPUT only).
If you will be connecting the LCD monitor to a Macintosh
PowerBook, set “Mirroring” to off.
Refer to your Macintosh’s owner’s manual for more infor-
mation about your computer’s video output requirements
and any special identification or configuring that may be
required.
The AUDIO IN1, 2, 3 can be used to choose the audio
source. To select, use the AUDIO INPUT button.
Connections
- continued
LCD Monitor
(second monitor)
Mini D-sub 15 pin
Macintosh
BNC x 5
BNC x 5
BNC x 5
LCD Monitor
To RGB/HV Input
From Analog RGB Output
Mini D-sub 15 pin
From Audio Output
Denotes AV unit function. All AV functions are enabled with the AV
unit is installed. Not all models have the AV unit installed.
Denotes Digital Tuner function. All DTV and AV functions are
enabled when the DTV unit is installed. Not all models will have
the digital tuner installed.
(BNC Input only)