NEC MultiSync LCD4020, User Manual

Page: 14 / 54

English-8
2) Installing and removing stand
CAUTION
Installing and removing the stand must be done by two
or more people.
How to install stand
1. Please turn monitor off.
2. Place stand onto monitor with the long ends of the
feet in front of the monitor.
3. After inserting stand in guide block, fasten
thumbscrews on both sides of the monitor.
How to remove the stand
1. Spread the protective sheet on a flat surface, such
as a desk.
2. Place monitor on the protective sheet.
3. Remove thumbscrews with a screwdriver or with
your fingers and place them in a safe place for
reuse.
Installation
- continued
Thumbscrews
Thumbscrews
NOTE:
Place stand onto monitor so
that the long end of the feet are in the
front.