background image

Safety Precautions and Maintenance

FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE

FOLLOWING WHEN SETTING UP AND USING

THE MULTISYNC

®

 LCD COLOR MONITOR:

• DO NOT OPEN THE MONITOR. 

There are no user serviceable parts inside

and opening or removing covers may expose you to dangerous shock hazards
or other risks. Refer all servicing to qualified service personnel.

Allow adequate ventilation around the monitor so that heat can properly
dissipate. Do not block ventilated openings or place the monitor near a
radiator or other heat sources. Do not put anything on top of monitor.

Do not spill any liquids into the cabinet or use your monitor near water.

Do not insert objects of any kind into the cabinet slots, as they may touch
dangerous voltage points, which can be harmful or fatal or may cause electric
shock, fire or equipment failure.

Do not place any heavy objects on the power cord. Damage to the cord may
cause shock or fire.

Do not place this product on a sloping or unstable cart, stand or table, as the
monitor may fall, causing serious damage to the monitor.

The power cable connector is the primary means of detaching the system from
the power supply. The monitor should be installed close to a power outlet that
is easily accessible.

When operating the MultiSync LCD monitor with its AC220-240V worldwide
power supply, use a power supply cord that matches the power supply voltage of
the AC power outlet being used. The power supply cord you use must have been
approved by and comply with the safety standards of your country.

Handle with care when transporting. Save packaging for transporting.

Immediately unplug your monitor from the wall outlet and refer servicing to
qualified service personnel under the following conditions:

When the power supply cord or plug is damaged.

If liquid has been spilled, or objects have fallen into the monitor.

If the monitor has been exposed to rain or water.

If the monitor has been dropped or the cabinet damaged.

If the monitor does not operate normally by following operating instructions.

Recommended Use

6

78133331

9/25/98, 12:46 PM

8

Summary of Contents for MultiSync LCD400V LA-1422JMW LA-1422JMW
















Reviews: