NEC MultiSync LCD400V  LA-1422JMW LA-1422JMW User Manual Download Page 7

5

Controls

AccuColor

 Control System

Color presets select the desired color setting. If a setting is adjusted, the name of
the setting will change to Custom.

Color Gain (Red, Green, Blue):

 Increases or decreases Red, Green or Blue

color depending upon which is selected. The change in color will appear on
screen and the direction (increase or decrease) will be shown by the color
bars.

OSM

 Location

You can choose where you would like the OSM control image to appear on
your screen. Selecting OSM Location allows you to manually adjust the
position of the OSM control menu left, right, up or down.

OSM Turn Off Time

The OSM control menu will stay on as long as it is in use. In the OSM Turn
Off Time submenu, you can select how long the monitor waits after the last
touch of a button to shut off the OSM control menu. The preset choices are
10, 20, 30, 60 and 120 seconds.

OSM Lock Out

This control completely locks out access to all OSM control functions. When
attempting to activate OSM controls while in the Lock Out mode, a screen
will appear indicating the OSM controls are locked out. To activate the
OSM Lock Out function, press PROCEED, then   and hold down simulta-
neously. To de-activate the OSM Lock Out, press PROCEED, then   and hold
down simultaneously.

Display Mode

Display Mode provides information about the current resolution display and
technical data including the preset timing being used and the horizontal and
vertical frequencies.
NOTE: Mode Change should only be used if a resolution is not recognized

by the monitor. The user can change to the appropriate resolution
by entering the Display Mode sub-menu and selecting the
corresponding option.

Language Select

OSM control menus are available in six languages.

Factory Preset

Selecting Factory Preset allows you to reset all OSM control settings back to
the factory settings. The RESET button will need to be held down for several
seconds to take effect. Individual settings can be reset by highlighting the
control to be reset and pressing the RESET button.

78133331

9/25/98, 12:46 PM

7

Summary of Contents for MultiSync LCD400V LA-1422JMW LA-1422JMW
















Reviews: