English
English-3
Contents
Your new NEC MultiSync LCD monitor box* should contain the following:
•
MultiSync LCD monitor with tilt base
•
Audio Cable
•
Power Cord
•
Video Signal Cable (15-pin mini D-SUB male to 15-pin mini D-SUB male)
•
Video Signal Cable (DVI-D to DVI-D) (LCD225WNX only)
•
USB Cable (LCD205WNXM/LCD225WNXM only)
•
User’s Manual
•
Cable Management Cover
•
CD-ROM
Quick Start
To attach the MultiSync LCD monitor to your system, follow these instructions:
1. Turn off the power to your computer.
2.
For the PC or MAC with DVI digital output:
Connect the DVI-D signal cable (not included for the U.S. and China) to the
connector of the display card in your system (
Figure A.1
). Tighten all screws.
For the PC with Analog output:
Connect the 15-pin mini D-SUB signal cable to the connector of the display card in your
system (
Figure A.2
). Tighten all screws.
For the MAC:
Connect the MultiSync Macintosh cable adapter (not included) to the computer. Attach the 15-pin mini
D-SUB signal cable to the MultiSync Macintosh cable adapter
(
Figure A.3
). Tighten all screws.
NOTE:
Some Macintosh systems do not require a Macintosh cable adapter.
User’s Manual
Audio Cable
Power Cord*
2
15-pin mini D-SUB
male to 15-pin mini
D-SUB male
MultiSync LCD monitor
Figure A.1
Figure A.3
Macintosh
Cable Adapter
(not included)
Figure A.2
*
Remember to save your original box and packing material to transport or ship the monitor.
*2 Type of power cord included will depend on the where the LCD monitor is to be shipped.
DVI-D to DVI-D
(LCD225WNX only)
USB Cable
(LCD205WNXM/
LCD225WNXM only)
User’s
Manual
Cable Management
Cover
CD-ROM
