NEC MultiSync LCD1550VM, User Manual

Page: 14 / 188

English-6
Tilt
Grasp both sides of the monitor screen with your hands and adjust the
tilt as desired (
Figure TS.1 ).
Remove Monitor Stand for Mounting
To prepare the monitor for alternate mounting purposes:
1. Remove the connector cover and cable cover ( Figure R.1 ).
2. Disconnect all cables.
3. Place monitor face down on a non-abrasive surface ( Figure R.2 ).
4. Remove the 4 screws connecting the monitor to the stand and lift off
the stand assembly ( Figure R.2 ) the monitor is now ready for
mounting in an alternate manner.
5. Connect the AC cord, signal cable and audio cable to the back of the
monitor ( Figure R.3 ).
6. Reverse this process to reattach stand.
NOTE: Use only VESA-compatible alternative mounting method.
Figure TS.1
01b_English 7/11/01, 1:59 pm 6