background image

English-14

 ECO 

TOOLS

BRIGHTNESS

Adjusts the overall image and background screen brightness.
If ECO MODE is set to 1 or 2, a bar for CARBON FOOTPRINT will appear.

CONTRAST

Adjusts the overall image and background screen brightness by input signal level.

NOTE:  When L/B is selected in COLOR control, CONTRAST is disabled.

ECO MODE

Decreases the amount of power consumption by reducing the brightness level.

OFF: No function.

1: Sets brightness variable range from 0% to 70%.
This setting can adjust brightness to a range in which power is reduced by 10% compared to the maximum brightness 
setting.

2: Sets brightness variable range from 0% to 30%.
This setting can adjust brightness to a range in which power is reduced by 30% compared to the maximum brightness 
setting.
When this function is set to ON, a CARBON FOOTPRINT bar will appear alongside the brightness adjustment bar.

NOTE:  This function is disabled when DV MODE is set to DYNAMIC.
 

This function is disabled when Color Control System is set to DICOM SIM.

 

This function works only when MULTI PICTURE is off.

AUTO BRIGHTNESS

OFF: No function.

ON (AMBIENT LIGHT): Automatically adjusts the brightness to the optimal setting by detecting the brightness level of 
the environment*

1

.

*1: Please refer to page 27 for full “Auto Brightness” information.

NOTE:  This function is disabled when DV MODE is set to DYNAMIC.
 

This function is disabled when Color Control System is set to DICOM SIM.

 

This function works only when MULTI PICTURE is off.

BLACK LEVEL

Adjusts the black level.

OFF MODE SETTING

The Intelligent Power Manager allows the monitor to enter into power saving mode after a period of inactivity. 
The OFF MODE has two settings:

OFF: Monitor enters into power saving mode automatically when the input signal is lost.

ON: Monitor enters into power saving mode automatically when the amount of surrounding light goes below the level 
determined by you. The level can be adjusted in OFF MODE sensor setting.
When in power saving mode, the LED on the front of the monitor becomes dark blue. When in power saving mode, 
touch any of the front keys, except for POWER and INPUT/SELECT key, to return to normal.
When the amount of surrounding light returns to normal levels, the monitor will automatically return to normal mode.

SENSOR SETTING (OFF MODE SETTING)

Adjusts threshold level of ambient light sensor for detected dark condition and shows current sensor measurement 
result.

START TIME (OFF MODE SETTING)

Adjusts wait time to enter into to a lower power consumption level when ambient light sensor detects dark condition.

Summary of Contents for MultiSync EX341R































Reviews: