background image

English−14

Terminal Panel

1

 AC IN Connector

8

 Security Slot

4

 USB-C Port

2

 LAN

5

 DisplayPort IN

6

 HDMI IN

0

 Label

7

 Headphone

9

 Speaker

Speaker 

9

3

 USB Downstream Port (Type A)

1

 AC IO Connector

Connects with the supplied power cord.

2

 LAO Port IO (RJ-45)

This monitor is equipped with a LAN-to-USB conversion 

function. Through the USB port, a connected computer can 

access the monitor’s LAN connection. By connecting with 

the USB port, you can create a stable network environment 

even if the connected computer is not equipped with LAN 

ports.
OOTEN:  

LED on the side of LAN port lits when a LAN cable 

is connect to the monitor. 

Connected: Steady green LED. 

Communicating: Blinking amber LED.

USB Downstream Port (Type-A)

Connects with USB devices.

USB-C Port

Connects with USB Type-C

®

 compliant external equipment 

such as a computer. Charges a connected USB device 

(USB Power Delivery). See 

“Specifications”

 page.

OOTEN  •

Supports DisplayPort signals input when a 

connected USB-C device complies with USB 

Power Delivery.

 •

Functions as a USB hub.

 •

Provides power delivery to a connected device 

when the function is enabled in the OSD ([USB 

Functionality] must be set to [Auto] or [On]).

DisplayPort IO

Digital DisplayPort signals input.

6

 HDMI IO

Digital HDMI signals input.

7

 Headphone Jack

Connects with headphones.
The audio out signal is always routed to the headphone jack 

when headphones are connected to the monitor; there is no 

sound from the monitor speakers.

8

 Security Slot

Security and theft protection lock slot compatible with 

Kensington security cables/equipment. 

For products visit Kensington’s website.

9

 Speaker

0

 Label

Summary of Contents for MultiSync E224FL











































Reviews: