English−34
OSD Setup
OSD Setup Menu
Language
Selects the language used by the OSD.
OSD Turn Off
The OSD menu will stay open as long as it is in use. You can select how long the monitor waits after the
last touch to close the OSD menu. The preset choices are 5 - 120 seconds by 5-second increments.
System Setup
System Setup Menu
Auto Adjust (Analog input only)
[Left/Right], [Down/Up], [H.Size] and [Fine] are adjusted automatically when new timing is detected.
Auto Contrast (Analog input only) Adjusts the image displayed for non-standard video inputs.
FACTORY PRESET
Resets all OSD control settings back to the default settings except [Language].
Extra
Extra Menu
Input Select
Selects the input signal source.
Auto, DSUB, HDMI, DisplayPort.
Audio Mute
Mutes the speaker or headphone output.
Audio Volume
Controls the volume of the speakers or headphones.
DDC/CI
Turns the [DDC/CI] function [On] or [Off].
OSD arning
OO SINOALN This function gives a warning when there is no horizontal or vertical sync. After power is turned on or when there
is a change of input signal, the “OO SINOAL” window will appear. The message will close automatically.
OUT OF RAONEN This function gives a recommendation of the optimized resolution and refresh rate. After the power is turned
on, or there is a change of input signal, or if the video signal doesn’t have proper timing, the “OUT OF RAONE” message will
appear. To close the message, please disconnect signal cables.
This operation might increase power consumption. Do you want to continue?N This function notifies of the increase in
power consumption. The message appears when adjusting [DV MODE], [Brightness], or [ECO MODE] settings.
To change the setting, select [Yes] in the message window and press the Right key.
To return without changing, select [No] in the message window and press the Left key.