NEC MultiSync CB651Q User Manual Download Page 26

Page: 26 / 85

English-24

Compatible USB memory

Format a USB memory in the FAT32 format or NTFS format for using it in the Media Player. Refer to the computer’s instruction

user’s manual or Help file on how to format a USB memory.

Please use a USB memory with this monitor in accordance with the drawing below.

If the physical size of the USB device is larger than than the supported sizes listed below, please use a USB extension cable.

Unlimited

USB memory

Extension cable

Under 20 mm

NOTE: Check the format if this device cannot recognize the connected USB memory.

It is not guaranteed to work with all USB memories sold commercially.

Please connect the USB memory to the USB port.

FAT32 format supports read and write, NTFS format only supports reading ,does not support writing.

Summary of Contents for MultiSync CB651Q






















































































Search results

Summary of Contents for MultiSync CB651Q

Reviews:

Related manuals for MultiSync CB651Q

Brands by name

Popular brands

NEC MultiSync CB651Q, User Manual

Search results

Summary of Contents for MultiSync CB651Q

Reviews:

Related manuals for MultiSync CB651Q

Brands by name

Popular brands