manualshive.com logo in svg

NEC MultiProfiler, User Manual

Share
Download
NEC MultiProfiler User Manual Download Page 41

41 | MULTIPROFILER - USER’S GUIDE

Question:

 Can I use the OSD controls on the monitor to change the current Picture Mode?

Answer:

 Yes. When there is no OSD shown on the screen, press the up or down arrow buttons on the right side of the 

monitor to quickly access the Picture Mode. 
However,  be  aware  that  the  ICC/ColorSync  profile  for  the  newly  selected  Picture  Mode  will  not  be  generated  and 

registered with the Color Management System if the OSD is used rather than the MultiProfiler application. If you are not 

using a color managed workflow then this is not normally an issue. 
Also, if you are switching between color modes based on the same basic color settings (gamma, color gamut  and 

white point), or between a normal Picture Mode and a Print Emulation based on that normal Picture Mode, then the 

ICC/ColorSync profiles will be the same and the OSD can be used.

Question:

 How can I changed the Brightness on the OSD when using a Custom Picture Mode?

Answer:

 It is not possible to use the OSD controls to adjust the Custom Picture Mode settings. Use MultiProfiler to 

make any adjustments.

Question:

 When I create a Custom Print Emulation Picture Mode, what is the ICC/ColorSync profile that is created and 

registered with the Color Management System?

Answer:

 The profile is still a display profile, and represents the color gamut of the monitor as selected on the Print 

Emulation pages of the Color Configuration Wizard. So, for example, if you selected that the Display Gamut is sRGB, 

then the profile created will reflect a color gamut of sRGB.

Question:

 How does the monitor calculate colors and luminance values?

Answer:

 NEC MultiSync PA Series monitors are individually factory calibrated using a highly accurate lab-grade color 

measurement device. This calibration is combined with internal luminance, temperature and time monitoring of the 

display monitor in order to provide stable and accurate color. The internal SpectraView Engine color processor takes 

these factory measurements together with the internal sensor values and automatically calculates and compensates for 

color changes, and allows color values such as white point and brightness to be specified in absolute values. 

Question:

 Is it possible to calibrate the monitor using an external color sensor?

Answer:

 Yes. The SpectraView software is available to calibrate the monitor if necessary. In addition, the OSD or 

MultiProfiler controls can be used together with a 3rd party application to manually adjust the monitor together with an 

external color sensors if necessary.

Question:

 Why is the eciRGB V2 Picture Mode preset not enabled?

Answer:

 This preset is being added to newer production units and is not available on older units. The same functionality 

can be gained by manually creating a Picture Mode with the same color characteristics. Select a Color Gamut of 

ECI/

NTSC (1953)

, and a gamma of 

L* curve

.

6 

Frequently Asked Questions

Summary of Contents for MultiProfiler


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands