manualshive.com logo in svg

NEC MultiProfiler, User Manual

Share
Download
NEC MultiProfiler User Manual Download Page 11

11 | MULTIPROFILER - USER’S GUIDE

Picture Mode panel

The 

Picture Mode 

panel controls the settings for the 

various Picture Modes that the monitor supports, as 

well as adjusting the Brightness and Black Level.
The monitor supports 5 different configurable Picture 

Modes that can be quickly selected by clicking on 

the relevant buttons. Each Picture Mode can be 

configured with different color settings by selecting 

the desired Picture Mode to modify, and then clicking 

Edit...

. This will open the 

Color  Configuration 

Wizard

. 

As different Picture Modes are selected, MultiProfiler 

will automatically generate an ICC/ColorSync profile 

for the new color settings of the selected Picture 

Mode.  This  profile  will  be  automatically  registered 

with the Color Management System. 
See the Picture Modes section for a more detailed 

description.

Brightness

The 

Brightness

 slider and spinbox controls adjust the monitor brightness. The brightness is indicated in 

Candelas per square meter (cd/m²) and represents an absolute value. The SpectraView Engine automatically 

calculates and compensates the brightness value as color settings such as white point are changed. 
The Brightness control will indicate when any range limits have been reached that impact the screen 

performance:

Note: On the MultiSync PA231W model, the Brightness and Black Level controls are shown as percentages 

instead  of  absolute  luminance  values.  This  is  because  the  display  does  not  have  an  internal  luminance 

stabilization circuit.

Too  High

 - Is shown when 

the Brightness level setting 

is too high and can not be 

achieved by the monitor with 

the current setting. Lower 

the setting until the message 

disappears. It takes several 

seconds to update the level 

warning. 

Note: The monitor takes a few 

minutes after powering on for 

the  maximum  brightness  to 

stabilize.

Uniformity

 - Is shown when 

the Brightness control is set 

above the range that the monitor 

can achieve with the current 

Digital Uniformity Compensation 

setting. 
In this case the monitor will 

automatically reduce the 

Uniformity correction level in 

order to achieve the brightness 

setting level. 
See the Digital Uniformity section 

for more information.

Summary of Contents for MultiProfiler


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands