32 | MULTIPROFILER - USER’S GUIDE
Print Rendering Intent
The
Print Rendering Intent
page is shown after the
Print Emulation
page if a
Custom
Picture Mode is selected on
the first wizard page, and
Print Emulation (Print Preview)
is chosen as the custom type.
This page is used to configure how the printer ICC/ColorSync profile is used to create the 3D LUT in the monitor for the
print preview.
The first item to configure is the
Rendering Intent
. This setting
determines how colors are converted
to the color gamut of the printer.
The Rendering Intent setting should
match that used in the application,
printer configuration and/or system
preferences.
The selection of Rendering Intent
depends on many factors such as:
•
The application being used to
view, edit and print images.
•
The color settings for the actual
printer output (which may be in the
image application being used or the
printer setup.)
•
The type of print being made and
the color qualities that need to be
maintained when converting colors
to the gamut of the printer.
The
Simulate Paper and Black Ink
setting attempts to simulate the white
of the paper instead of being the
brightest white that the monitor can
produce. It also simulates how dense black appears on the paper.
The
Display Gamut
selection is used to select the color gamut that the monitor will normally be used in when not
performing a print emulation. This is used to calculate how colors must be transformed to display correctly even if the
monitor is not being used in it’s
Full (Native)
color gamut. If you are using the monitor in
AdobeRGB
or
sRGB
modes
then select the appropriate gamut. For example, if you are using the monitor as an sRGB display by creating an sRGB
Picture Mode for when you view images, then select sRGB.
Important: This setting is not the same as the working colorspace or document colorspace in applications like Adobe
Photoshop.
The
Use Adobe CMM
selection will use the Adobe Color Management Module to create the 3D LUT for the print
emulation instead of the default Color Management System (ColorSync on Mac OS, and ICM on Windows). The Adobe
CMM must be installed on the system for this item to be enabled.
The
View 3D LUT
selection will open a separate window to show the 3D LUT created by MultiProfiler using the current
settings. This is useful to visualize how the color gamut of the monitor is altered to emulate that of the printer, and the
impact of each of the settings.
Summary of Contents for MultiProfiler
Page 1: ...Version 1 0 05 User s Guide ...
Page 42: ...42 MULTIPROFILER USER S GUIDE ...
