CHAPTER 10 COMMANDS
Information S14769EJ1V0IF00
36
Q.10.4
How is the NOP command used?
A.10.4
The NOP command is issued two times to close a receive VC after the receive look-up table has been disabled, in
the following sequence:
(1) Disable the receive look-up table.
(2) Issue the NOP command two times.
(3) Issue the receive Deactivate_Channel command.
(4) Issue the receive Close_Channel command.
Reference:
µ
PD98409 User’s Manual 6.6 Command Details
