
*HW&RQQHFWHG
&RQQHFWWR:RUN
If you have access to a private network, such as a corporate network you
use at work, you can send e-mail messages, view intranet pages,
synchronise your Pocket PC and possibly access the Internet. You can
connect to work in one of two ways:
Create a modem connection by using a Remote Access Services
(RAS) account. Before you can create this modem connection, your
network administrator needs to set up a RAS account for you. If this is
the method you want to use, see “Create a Modem Connection to a
Network.” Your network administrator might also give you Virtual
Private Network (VPN) settings.
Use an optional SD network card and a net tap to connect to the
network. If this is the method you want to use, see “Create an Ethernet
Connection to a Network.”
Use an optional SD wireless network card to connect to the network
wirelessly. If this is the method you want to use, see “Create a
Wireless Connection to a Network.”
&UHDWHD0RGHP&RQQHFWLRQWRD1HWZRUN
Create your modem connection to a network as follows:
Obtain the following information from your ISP: dial-up access telephone
number, user name, password, domain name and TCP/IP settings
Install an optional IR modem or SD modem card.
Tap
and
6HWWLQJV
. In the
&RQQHFWLRQV
tab, tap
&RQQHFWLRQV
.
In
0\:RUN1HWZRUN
, tap
$GGDQHZPRGHPFRQQHFWLRQ
.
Follow the instructions in the New Connection Wizard.
To view additional information for any screen in the wizard or while
changing settings, tap .
To start the connection, use one of the following programs. Your Pocket
PC automatically begins connecting. Once connected, you can:
Send and receive e-mail messages by using Inbox. Before you can use
Inbox, you need to provide the information it needs to communicate
with the e-mail server. For specific instructions, see “Connect Directly
to an E-mail Server,” later in this chapter.
Visit Internet or intranet Web or WAP pages by using Pocket Internet
Explorer. For more information, see Chapter 5.
Send and receive instant messages with MSN Messenger. For more
information, see “MSN Messenger” in Chapter 4.
Synchronise. For more information, please refer to ActiveSync Help
on the computer.
&UHDWHDQ(WKHUQHW&RQQHFWLRQWRD1HWZRUN
Create an Ethernet connection to a network as follows:
You do not need to create a new connection on your Pocket PC. You
need an optional SD network card for your Pocket PC.
Get a user name, password and domain name from your network
administrator.
Install the Ethernet card on your Pocket PC. For instructions on installing
and using the Ethernet card, see the owner’s manual for the card.
The first time you install the card, Network Settings appears
automatically so that you can configure the Ethernet card. Most
networks use DHCP, so you should not have to change these settings
unless your network administrator instructs you to do so. Tap
2.
. (If
it does not appear or to change settings later, tap
and
6HWWLQJV
. Tap
&RQQHFWLRQV
tab,
$GYDQFHG
tab and
1HWZRUN&DUG
.
If you need to enter specific server information, tap the appropriate
adapter, and then tap
3URSHUWLHV
. Most networks use DHCP, so you
should not have to change these settings unless your network
administrator instructs you to do so.
Summary of Contents for MobilePro 250e
